Automotive Tips from Gary Knurek GoodYear: Serpentine Belt System Wear
February 28, 2016
The primary job of the serpentine belt for Troy drivers is to provide important traction to spin the accessories. As the belt wears it loses some of its grip and the accessories may not spin at optimal speeds. For example, if your alternator doesn’t spin fast enough, the battery will not completely recharge while you’re driving and you could end up stranded around Troy with a dead battery.
In short, a worn serpentine belt will stress all of the accessories it powers leading to premature wear and possible early replacement. When as little as 5% of belt material is lost, the serpentine belt cannot provide the proper traction for the accessories. Your friendly and professional Gary Knurek GoodYear service advisor can inspect your belt for excessive wear and replace your serpentine belt system if it’s excessively worn.
Give us a call.
Gary Knurek GoodYear
1973 Livernois
Troy, Michigan 48083
248-362-0350
Need Service?
More articles from Gary Knurek, Authorized GoodYear Dealer

Grease is the Word
November 8, 2026
If you have a rear-wheel drive or four-wheel drive vehicle, it has a driveshaft. Its the metal tube that transmits mechanical power from the transmission to the differential and, ultimately, to your wheels. Because it does a lot of turning in its lifetime, it is lubricated so that power can ... More

Can This Tire Be Saved? A Guide to Tire Repair vs. Replacement
November 1, 2026
When something goes wrong with one of your tires, one of the first things that goes through your head is: Do I have to buy a new tire, or is it possible to save this one with a repair? Understanding when you can have a tire fixed and when you need it replaced can prevent you from driving an unsaf... More

Catching Trouble Early
October 25, 2026
Your vehicle depends on wheel bearings. Sitting between the wheels hub and axle, they allow your wheels to spin smoothly, bear the vehicles weight and work in harmony to stay aligned with other parts. Wheel bearings can fail in several ways, and they may send the driver some pretty clear clues... More
