Back to all

Busted: The Maintenance-Free Myth In Rochester

October 26, 2013

Your browser does not support video

There’s a segment of the Rochester population that’s not committed to proper vehicle maintenance. Mistaken perceptions have crept into the Michigan area over time. Many Rochester motorists think the root lies in the fact that modern cars are so reliable. Reliability has improved dramatically in recent years. Quality surveys report fewer problems with new cars than ever before.

Back when cars spent more time in the repair shop, Rochester drivers were more mindful of routine service. Now, it’s much easier to put it off.

Take tune-ups for example. In the days of mechanical ignition systems, an engine needed to be tuned-up every couple of years. The ignition points had to be replaced, spark plugs and coils replaced and the timing adjusted. If your engine was out of tune, you knew it. It ran poorly and got bad fuel economy.

Bloomfield The Maintenance-Free MythNow, the ignition system in your SUV is electronic and controlled by the engine management computer. Spark plugs rarely get fouled and will last for as much as a hundred thousand miles. So tune-ups used to force you in to Gary Knurek GoodYear for service and while you were there you just took care of whatever else was on the list.

Also, in recent years, a large percentage of new cars in Rochester have been leased. These folks plan on turning the car in after two or three years, so they haven’t focused on the maintenance that helps your car last longer.

Given all that, what’s the benefit to keeping up with factory scheduled maintenance? Well, your SUV will perform better and return better fuel economy.

Those benefits pay for themselves as they go along. The big plus is that major repairs are prevented. And these aren’t just repairs that are a long ways off. Modern SUV engines are far more sophisticated and have many parts that are in critical need of proper lubrication. Missing just one oil change can allow oil sludge to start forming. Sludge clogs small engine passages, robbing parts of the lubrication they need. An expensive failure could easily occur within two or three years.

And modern engines require more sophisticated fluids. Because of the different types of materials that are used to make auto parts, things like aluminum, plastics and steel, different types of additives are required to protect automotive components from corrosion. These additives deplete with time as well as with use.

For example, your SUV engine coolant could actually become so corrosive that it eats holes in your radiator or other cooling system parts. Of course, that could lead to massive engine damage, all for the want of replacing the coolant on schedule.

Taking care of the little things now prevents big problems later. At Gary Knurek GoodYear, we have been taking care of all those little things for 10 years. Your SUV still needs to be taken care of – it’s just that some of those points of care have changed with automotive advancements. The need for proper maintenance in Rochester did not go away.

Need Service?

Request a Quote

More articles from Gary Knurek, Authorized GoodYear Dealer

No Shake, Just Smooth

July 12, 2026

When your vehicles wheels are out of balance, theyll likely give you some clues. Your steering wheel might shake, the floor or seat vibrates and you might find your vehicle pulling to one side. Other signs? Your tires might wear unevenly and may make odd noises. Plus, fuel economy might not be ... More

Stop Right There!

July 5, 2026

Your vehicles brakes are only as good as its master cylinder. This part is truly is the heart of your braking system, because if it isnt working the way it should, the rest of the brake system cant either. The master cylinder is what takes the pressure you put on the brake pedal and ultimately... More

Why Timing Belt Maintenance Can Save Your Engine

June 28, 2026

One part of your vehicle you probably never think of is the timing belt. It coordinates the rotation of the crankshaft (which converts the up and down motion of the pistons into rotation motion) and the camshaft (which opens and closes your engines valves). Its vital that the timing of these mov... More