Fuel Saving Tip: Tire Pressure Saves Fuel In Rochester
October 29, 2014
Under-inflated tires waste gas for lots of folks in the Rochester area. Think how hard it is to walk in sand – you just have to work harder because of the resistance. When your tires don't have enough air in them, their rolling resistance is dramatically increased and it simply takes more gas to get from Troy to Rochester.
Always check your tire pressure when you gas up at one of our local Rochester service stations. If they're low – even just a little bit – bring them up to proper pressure. There's a sticker on the inside of your driver's door that gives the manufacturer's recommended tire pressure.
And don't rely on your tire pressure monitoring system to alert you to when you need more air. The TPMS system is set to warn you when pressure drops twenty percent below recommendations. That's severely under inflated and you needed more air a long time ago. And if you have a slow leak – get it fixed right away at Gary Knurek GoodYear.
Get some air and save some gas.
Need Service?
More articles from Gary Knurek, Authorized GoodYear Dealer

Control Arms: Small Part, Big Impact
July 19, 2026
Heres one part of your vehicle you may never have heard of: the control arm. Its the part that connects the wheel hub and steering knuckle to your vehicles frame. What it does is lets your wheel move up and down while keeping it aligned with your vehicle. Most control arms have things called ... More

No Shake, Just Smooth
July 12, 2026
When your vehicles wheels are out of balance, theyll likely give you some clues. Your steering wheel might shake, the floor or seat vibrates and you might find your vehicle pulling to one side. Other signs? Your tires might wear unevenly and may make odd noises. Plus, fuel economy might not be ... More

Stop Right There!
July 5, 2026
Your vehicles brakes are only as good as its master cylinder. This part is truly is the heart of your braking system, because if it isnt working the way it should, the rest of the brake system cant either. The master cylinder is what takes the pressure you put on the brake pedal and ultimately... More
