Back to all

Troy Drivers: Is It Time to Replace Your PCV Valve?

October 9, 2017

drive

The crankcase is the lower part of the engine where the crankshaft is housed and where the engine oil lives. The crankshaft is connected to the pistons that power the engine.


When you are diving around Troy, fuel is burned in your vehicle engine, it pushes the pistons down and the crankshaft rotates and sends power to the transmission. Some of the explosive gases from combustion squeeze past the pistons and down into the crankcase.

Now this gas is about 70% unburned fuel. If it were allowed to remain in the crankcase, it would contaminate the oil and quickly turn it to sludge. Sludge is like Vaseline and clogs passages in the engine, leading to damage.

Also, the pressure build up would blow out seals and gaskets. So in the old days, there was just a hose that vented the crankcase out into the air. Obviously, not good for our air quality in Troy, Michigan.

Enter the PCV valve. It's a small, one-way valve that lets out the gases from the crankcase and routes them back into the air intake system where they are re-burned in the engine. Fresh air comes into the crankcase through a breather tube. This makes for good circulation in the crankcase. And that gets the air out. As you can imagine, however, the valve gets gummed up over time.

Your vehicle manufacturer usually recommends they be changed somewhere between 20,000 to 50,000 miles/30,000 to 80,000 kilometers. Unfortunately, PCV valve replacement is left out of some vehicle owner's manuals, but your friendly service advisor at Gary Knurek GoodYear, we will make sure your PVC is replaced if needed.

Gary Knurek GoodYear
1973 Livernois
Troy, Michigan 48083
248-362-0350

Need Service?

Request a Quote

More articles from Gary Knurek, Authorized GoodYear Dealer

The Untold Truth About Blinker Fluid: Why Your Car Desperately Needs It

May 10, 2026

If youve been ignoring your dashboard, your mechanic, and that one guy at the gas station who muttered bro your blinkers sound dry, then buckle up because today we dive into the critical world of blinker fluid maintenance. What Is Blinker Fluid? Blinker fluid is a high-viscosity, luminescent com... More

Go with the Flow (MAF Sensor Replacement)

April 15, 2026

If your vehicle has an internal combustion engine, it depends on two things to make propulsion power for you to be able to motor on down the road: fuel and air. The engine mixes the two in just the right proportion so that they can be ignited, creating a series of tiny explosions that are coordi... More

Why is My Brake Pedal Hard to Push?

April 14, 2026

When you push on your brake pedal, you should find your vehicle easy to stop. But at some point, you might notice stopping takes much more pressure on the pedal than it used to. When it gets to that point it becomes a safety issue, and you should bring your vehicle in so we can track down whats... More